Detached garages

Garages located by the house manufactured by LEGBUD GARGULA are functional and cheap solution of the problem of securing car or other property against the influence of weather conditions as well as the theft. Structure of garages is made of steel galvanized sections. Walls are cladded with trapezoidal sheet - trapezoid T10 - galvanized or coated with organic layer in colours from RAL palette. The roof is made of trapezoidal sheet - trapezoid T14.

BThe sheets are fixed to the structure with use of steel rivets and the roof sheets are fixed with self-drilling screws with gaskets. In standard garages, tilt-up doors GARSTA are installed (also with a wicket). It is also possible to install a biparting door and additional entrance located in side or rear wall. Structure of the garage makes the installation exceptionally simple and quick.

Garages are produced in two basic dimensions: 3000x5000x2100x1900 and 3000x6000x2200x1900 (width x length x height front x height rear). We also manufacture garages of dimensions adjusted to individual requirements of area up to 28 m².

In standard execution we use two cross-bars. It has a primary influence upon safe usage for example in situations when a thick layer of snow lays on the roof, which should be removed. The garage shall be fixed to the base by screwing the structure to the foundations with use of (steel) expansion bolts.

It is also possible to install a garage as a semi-detached (wall with or without filler). Other option is manufacturing the garage with ridge roof or shed roof.

Gallery

Colours

RAL 8017 dark brown	BTX 6701 brown	BTX 7700 black	RAL 8004 brick-red	BTX 4702 green
RAL 3005 cherry-red	RAL 9006 silver	RAL 9010 white	BTX 5703 graphite
Other colours from RAL palette

Dimensions

Dimensions of typical garage in mm: 3000x5000x2100x1900 and 3000x6000x2200x1900 (width x length x height front x height rear)

NOTE:
A garage must not be higher than 3000 mm, wider than 4000 mm and longer than 7000.

Options of additional outfit of garages:

• semi-detached garage with common wall - wall with or without filler
• GARSTA door, skin made of sheet with polyester layer - option in the case of galvanized garages
• wicket door installed in the door leaf (standard execution)
• wicket door installed in the garage wall (standard execution)
• holder for padlock (2 pcs.) by the doors
• ridge roof or shed roof
• biparting door